Results 1 to 5 of 5

Thread: mk4 spoiler

  
  1. #1
    Status
    Offline
    Stewhit91's Avatar
    AOC Newbie
    Join Date
    Apr 2010
    Posts
    17
    Mentioned in
    0 Post(s)
    Quoted
    0 Post(s)

    mk4 spoiler

    i am thinking of fitting a spoiler to my mk4. just wondered if any1 else had fitted one? if so how easy/hard are they to fit bearing in mind mines never had one so will need holes drilling etc.

  2. #2
    Status
    Offline
    Chianti Ash's Avatar
    AOC Regular
    Join Date
    Aug 2009
    Posts
    97
    Mentioned in
    0 Post(s)
    Quoted
    0 Post(s)
    I got a local body guy to fit my coupe one. Didnt look too hard just plan it out and measure then measure again... and again. He used masking tape and put some over where it attatches then used a pencil to mark up on the tape where it sits and where to drill holes, the tape also protects paint work when drilling. sorry i cant help more.

    Good luck
    "\....Chianti Ash ..../"

  3. #3
    Status
    Offline
    fruitnuts's Avatar
    AOC Regular
    Join Date
    Aug 2010
    Posts
    164
    Mentioned in
    0 Post(s)
    Quoted
    0 Post(s)
    I used blue tack on both sides of the boot then rested the spoiler to fit marking the wholes from the spoiler onto the bluetac then counterpunched the marks then removed bluetac then drilled ,job done .

  4. #4
    Status
    Offline
    Stewhit91's Avatar
    AOC Newbie
    Join Date
    Apr 2010
    Posts
    17
    Mentioned in
    0 Post(s)
    Quoted
    0 Post(s)
    thanks for the help. all i need to do now is find one in star silver

  5. #5
    Status
    Offline
    andybon's Avatar
    AOC Fanatic
    Join Date
    Sep 2009
    Posts
    998
    Mentioned in
    0 Post(s)
    Quoted
    0 Post(s)
    The way i did mine was to put some masking tape onto the boot and sit the spoiler on with the bolts in, Line it up where you want it then firmly tap down onto the spoiler to make a mark on the masking tape. Then drill your holes.

    Other people have got hold of some templates to use to drill the holes. Bit of a waste of money IMO as you are only going to use them once anyway!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •