Couple of ??
1, While cleaning my EGR and Map sensor, I noticed that the swirlflap linkage bar connecting each flap together had come off no's 1,2 & 4. Checked movement of all flaps and they all move freely I don't know how long its been like this as I've not noticed any power loss or fault codes/lights.
My concern is should the linkage bar be a tight fit on top of each flap joint.
2, I've recently noticed that when dipping the clutch I get a slight rattling, there is no noice with foot off clutch. It almost sounds like a dry release bearing but have read that when the flywheel starts to play up you get a similar noice.
Tha car has covered 93000 and as far as i know is on its original clutch