I fitted my coilovers last sunday and although im over the moon with the suspension kit ive got a bit of a problem. I have replaced anti roll bar links and ive ordered new steering ends.
But I had a bit of a arse clentching moment, I took a long sweeping bend at around 50-60mph which is more than ok on this bit of road. And Ive done it loads before having the suspension done.
However the car kinda steered/ rolled right while I was in a left hand turn
Other than this incident the car drives and handles fine.
I know I need to get the Wheel alignment done, which maybe causing the problem, specially as the car is lowered 120mm on the front and 60mm on the rear.
The problem I have been told could be down to the wishbone bushes?
So I dont know whats best to do, just replace the standard wishbones or re-bush the arms I have using powerflex parts. It it a worth while upgrade and how easy are they to fit?
Any advise would be great