Y17DTL 2003 model - although its in Combo its identical to the Y17DT used in the Astra G - just without the intercooler for those not in the know
Anyway...... I need a new EGR Solenoid valve - the one that sits ontop of the inlet manifold - the PN for this for anyone interested is 97218331
Basically i snapped the spout on it last nite so had to bodge it with araldite!
Anyway, Ive sourced what i believe is 2 of the other solenoids - basically a pair of the one used down the back of the engine just below the EDU and Diesel pump. PN for this being 97219155
NOW then the big question..... will this lower one fit the setup on the top?
Im hoping its similar to the setup on the petrol models in that the solenoids are interchangeable its just the fact that the pipe diameters are different?
I will be replacing the vac hoses with fresh silicone hose throughout so the bore is easily overcomed.
Any problems u can envisage if i fit the lower one to the top??
If anyone can offer some help id be pleased if u could ASAP as im about to pick these solenoids up this afternoon to try on the old oil burner.
Much appreciated chaps