I know how to fit it, or at least have a good idea, but encountered 2 problems today , the second of which made me unable to fit the kit.
The kit i bought from hids-direct on eBay:
The fiddly bits (my editing, if you can't work it out now, will be explained later as problem 1): Oh, i found another 2 cable ties after i took this pic
Not wanting to butcher my own holders, balls it up & be left holder-less, i bought some in supposedly for this job from alltronix_ltd on eBay. £16.98: link can be found here: http://cgi.ebay.co.uk/VAUXHALL-OPEL-...item4ceb55cf2d
The second pic i linked there - i can see where the nuts go. The small nuts go through the ballast box into the bracket no problem. The larger one that is to go through the box into the bracket just wont go at all. The hole isn't big enough for the job. A small nut will fit, but they're not long enough to pass through the ballast box & into the bracket, holding it secure.
Something or nothing, but an issue anyway.
Second & Main Problem:
Trying to pass the wiring from the HID bulb through the bulb holder just wont go due to one connector.
The problem article is marked up as #5 in the following pic:
It just wont pass through the bulb holder. I could live with problem 1, but problem 2 is causing the job to come to a halt.
Any help please?