I bought an i-pod connection cable to go with my newly installed Pioneer DEHP-8600WM.
I Have 3 problems.
1. The MFD display contantly shows time and temperature.
2. The Aerial booster isn't connected so poor radio reception. Threads
here say connect the blue wire up. Haynes manual says Booster wire is
red+white. There is also a grey wire in the same connection on the car
ISO which goes to MFD. what wires do I connect to what?
I have connected the red/white to the blue wire comming out of the
Head unit. Although i've now undone this so I don't flatten my battery.
3. The i-pod lead has needs a live feed, which I've taken off the blue
wire coming out of the Head unit and an earth which I've connected
to a screw by the aerial on the head unit. The i-pod says "charging
not supported by this device" It came from Hong Kong so I'm not
going to send it back. Don't know if this is a wiring issue. Also sound
only comes out if connected via the headphone socket. No sound out
of i-pod block connector. Any ideas.