I fitted the pace intercooler to my car a few months ago with a slim line fan which i brought from ebay. Now the weathers hot the cars getting up to 90deg on the temp guage. And hence now ive got a problem.
When the old fan used to cut in at 90deg, this one doesnt and the square box with fan light comes up on the dash. The needle creeps past the 90deg notch and then the big fan on the inside of the engine bay will come on and cool the car down. (which is quite loud i might add)
Also when i use the aircon, it brings both fans on (with the warning light) but the front fan works, though im not sure its going the right way.
Ive got the bit off the old fan with the coil of wire and resistor wired in too.
Could it be that the new fan is wired the wrong way round?
Any one else had this problem or similar