Basically got some questions about wiring things in.
First of all i got my power, RCA's, Rem lead and earth cable.
IS there any way i could wire the neons into the Amp/Power cable (before the amp) to gain its power, or would i need another cable?
Ive got a sound box which im planning to wire to the neons, so they flash to the beat of the music.
But whats the best way to do it, power lead ( from where?) > to a switch > to the sound box > to the inverter ( also wire in a earth to the inverter to the bodywork) > to the neons.
Will that work?
Next, im putting a ground loop and a bass controller in, do i just plug the RCA's in, then connect the RCA's out of the ground loop to the bass controller, then the RCA's from that to the AMP. is that correct?
Last of all, im wanting a power cap into the circuit, so do i connect the power cable into it (from the battery?), then connect it to the Amp.
That correct? also i heard when wiring it in for the first time, i should remove the fuse on the power cable, and connect the cables up, and in the place of the fuse, put a bulb in, and wait for it to go dim ( so its powered up)
Is that correct to?
Sorry for the essay, thanks very much.
Edit:Thanks for moving, i realised it was in the wrong section as soon as i pressed submit.