Wright I'm not sure if this is the right area for this here goes after having an alarm about 3 months back everything was fine.
Then before decided to fit my Richbrook door pins again worked fine then about a month back noticed that the drivers side pin doesn't go all the way down.
And so when you lift the driver door handle the door some times opens or pulls the lock fully down to which then when you deactivated to alarm the lock will open but if you just arm it then disarm they stay down, but will open with the remote on the key it's self.
So thought this was down to the new pin sticking but wasn't sure as the remote key always opens them.
So today I stripped of the door card off and tried pressing the door pin down it just unlocks after locking and so I locked the car with the alarm remote again and same as before the pin doesn't go all the way down but does if you pull the handle I've also notice that I cant lock the car with the remote as it just unlock straight after.
Any ideas why it's doing this Cheers. Don't really want some to be able to open the car even with the alarm on Cheers.