can sumone help me trying to wire up my amp and need help. had a quick look and it looks like you need to take the seats out to run the cables down the sill is this right?
i didnt, from the front (i went down drivers side) remove panel behind bonnet release, should be one screw, then lift up sill, pull it gently of connectors and run wires down to the end, i then pulled the rear card off one pin and managed to slide the wires through and then up into the boot. clip everything back into place and its all groovy. i hope that made sense....
what year is your car mate, if its after 2000 then you can do as pete has said, if before 200 then the hole which pete is tlking about will be taken with your throttle cable, and you have to drill a hole in the bulk head, let us know what you got any we can explain more
think he means running the wires through inside the car,
One important thing to remember, run the power lead and remote lead down the opposite side of the car to the phono leads so they dont interfere. You can get away with tucking them under the panels at the sides, you dont have to take the seats out at all.
Have you found how to run your power lead from the battery in to the car yet?
for my power cable i took the glovebox out and drilled a hole. i put a gromit in aswell. just dont hit anything in the engine bay!! lol
the cables then tuck under the rubber. i took the back seats out thou but that is no problem whatsoever.