Hi - can someone add this to thedatabase please?
Tools needed - torx bit, needlenose pliers, fingernail.
First part is to remove the dial shroud - extend and lower steering wheel fully and leave central.
Then remove the shroud (you will have to squeeze it a bit). Make sure you lift the bottom part up over the column first.
Then remove other screws and the clocks...
And then swop the LEDs / Bulbs over. Only twist 1/4 to 1/2 turn in socket. Undo Anticlockwise, and replace turning clockwise
Refit the clock unit, lock with the yellow lever, and check all the bulbs light up.
Pic of my lacquered bulbs.