I've got a wee problem with my front bumber - it keeps popping off the mounting clip at the top of the bumper,in the near side wing just behind the headlight.
The whole bumper on this side seems to have a lot of play even when clipped in and all the bolts/clips are done tight. Inside the front wheel arch in only seems to be fastened to the arch liner which is quite loose inside the wheelarch and I can see no missing clips that are causing the waggle.
Could the lovely members of AS, please give theirs a waggle and see if theirs is stiff or wobbly. I'm particularly interested in the inner wing/arch liner join as this seems to be the root of the problem.
Let me know before I resort to self-cr4pping screws/ drill remedy.
Ta in advance