PDA

View Full Version : dump valve piping


sximk4
16-08-2007, 10:04
hi guys just a quick question... i have a balileys dump valve fitted and does anyone know the size(inside and outside diameter) of the piping that runs from the dump valve as mine has spilt and i need to replace it....

cheers

sximk4
16-08-2007, 11:19
its the small red tube that runs off the dump valve ... and down to the t-shaped white platic pipe if that helps

sximk4
16-08-2007, 12:12
oh and if pos where can i get it from


cheers

sximk4
16-08-2007, 15:16
anyone...............

sximk4
17-08-2007, 13:13
anyone........

Scottyboy
17-08-2007, 13:18
Dims should match the one you are taking off?

sximk4
17-08-2007, 13:22
Dims should match the one you are taking off?


sorry scottyboy dont understand ......Dims????

Jonesy
17-08-2007, 13:22
yeah, keep the diameters the same, and you can use pretty much any silicone hosing, i bought a roll of samco hosing, only a few quid..

look at www.merlinmotorsport.co.uk perhaps, they may sell some in the samco hosing section

sximk4
17-08-2007, 13:35
cheers will have a look only need the small bit that goes off the t shape bar and onto the pipe that runs up to the dump valve so guess could just cut it if i buy more

Jonesy
17-08-2007, 13:49
cheers will have a look only need the small bit that goes off the t shape bar and onto the pipe that runs up to the dump valve so guess could just cut it if i buy more

you can also buy vacuum hosing directly from vauxhall, comes in rolls and is pretty cheap - although they dont always keep it in stock

sximk4
17-08-2007, 14:02
kool but i take it that any silicon hose will do ....i just ask coz my mate has some halford silicon hose that he said i could have a just what to know if it will do for a temp fix type thing till i can get some proper stuff

Jonesy
17-08-2007, 14:08
if its good silecone hose(cant see them selling crap stuff really, although it is halfrauds..) you should be ok really, aslong as its a tight fit to the ends its connecting to

sximk4
17-08-2007, 14:35
kool cheers for the help

sximk4
25-08-2007, 23:46
know this might sound stupid but is vacum hoses the same as sillicon hoses or are they 2 different things

Gnasher
26-08-2007, 03:09
Silicon hosing is the actual stuff it's made out of, you can get it in various diameters, for different uses.

Vacuum hoses are just small diameter hoses made out of silicon without all the extra reinforcement for the pressures used in boost pipes etc.

Hope that helps!